Item List

measures the workability of fresh concrete by determining how long it takes to change its shape from a cone to a cylinder

a device used to measure the consistency and workability of fresh concrete

determining the consistency of plastic concrete.

performing rapid, non destructive quality testing on materials in accordance with customer's specifications

rowels, hand scoop (15.2 cm long), a rod of steel or other suitable material (1.6 cm diameter, 61 cm long rounded at one end ) and a balance.

used to determine the workability of mortar by measuring its flow.

determining the passing ratio of self compacting concrete.

To drive piles in/out of the ground for constructing structures like bridges, harbors, roads, airports, canal works and so on.

to compact concrete samples in molds

determining strain and deformation characteristics of standard concrete cylinders of 150mm diameter x 300mm length.

to determine the compressive strength of materials like concrete, bricks, or stones by applying a controlled compressive load to a test specimen

The automatic Bitumen Extractor is used for the separation and extraction of bitumen by use of perchloroethylene or trichloroethylene solvents and sieving, for the separation of filler by centrifuge action and for the recovery of solvent material.

t is used to find out the consistency, initial setting time and final setting time of the cement.

to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimetres per gram of cement.

a device used to measure the consistency and setting time of cement, mortar, and concrete.

Use to determine the setting time of cement

determine consistency of fresh concrete

used for determining the expansion of cement

determining the apparent specific gravity of sand, stone, hydraulic cement and slag screenings

reinforcement bars or fibers that are strategically placed within the concrete to help control and distribute the tensile forces caused by shrinkage

a device that measures changes in the length of concrete, mortar, and cement specimens

consists of a two chamber, reversible piston assembly mounted onto an enclosure which contains the flow control valves and internal fluid lines

conducting accelerated soundness test on cements by the autoclave expansion test requiring constant steam pressure with the correspondent constant temperature.

designed for the standard-compliant compaction of cement mortar and other binding material in moulds 

to determine if the aggregate particles are to be considered as flaky

used for determining the elongation index of aggregates

the volume of a liquid.

Used for specific gravity (Buoyancy Balance) and water absorption test of aggregate

reducing brittle materials with a tendency to fracture

used to determine the quality and strength of aggregates

measures how resistant aggregates are to wear and tear

tor testing crushed slag and crushed & uncrushed gravel for resistance to abrasion

to determine the impact value of aggregates and select them for a given application

a steel cylinder with a diameter of 15cm, a plunger, a base plate, a straight metal tamping rod (around 16mm diameter), a balance capable of measuring up to 3kg with 1 gram accuracy, and a compression testing machine

used for halving initial samples.

a procedure that determines the average size of particles in a sample

for use in the Gilson Testing Screen and Test-Master  screen shakers

high precision and can provide readings down to 0.01 mm or even finer increments.

drilling occasional or small diameter holes, in sensitive environments or in confined spaces

 to determine rock strength indexes in geotechnical practice.

to measure the strength of the bond between fibers and matrix under various loads.

a laboratory test that measures the maximum compressive stress a soil or rock specimen can withstand

to examine the compressive and tensile stress of materials.

enables the specific determination of the spring intersection points and the resulting force from the force components when loading the spring under compressive force.

to find out how strong a material is and also how much it can be stretched before it breaks